Tel: +86-21-59880227 / 59880237
Fax: +86-21-59880237
E-mail: info@jingquantools.com
Concept Arix Diamond Granite Blade
Feature:
1. Item No.: 9001C.
2. Fasting Cutting: Concept Arix Diamond Saw Bladecan use 5.5meter/minute speed to cut 3cm thickness hard granite slab; the speed is even 210% faster than normal blade.
3. Low Noise: Concept Arix Diamond Saw Bladehas 0.5-2.5DB lower than traditional blades.
4. No Chipping: Concept Arix Diamond Saw Bladewill not cause chipping at all because diamonds are always on both sides of segments which are fine enough to provide fast and chip-free cutting.
5. Straight cutting: A groove appears on the segment during cutting because of evenly distributed diamonds to keep straight cutting.
6. Consistency: Concept Arix Diamond Saw Blade guarantees consistent performance throughout the cutting process.
|
Item No. |
Dia. |
Segment Thickness (mm) |
Height (mm) |
Hole (mm) |
Segment No. |
|
9001C012 |
12"(300mm) |
2.8 |
15/20 |
50/60 |
21 |
|
9001C014 |
14"(350mm) |
3.2 |
15/20 |
50/60 |
24 |
|
9001C016 |
16"(400mm) |
3.5 |
15/20 |
50/60 |
28 |
|
9001C018 |
18"(450mm) |
4.0 |
15/20 |
50/60 |
32 |
|
9001C020 |
20"(500mm) |
4.2 |
15/20 |
50/60 |
36 |
|
9001C022 |
22"(550mm) |
4.6 |
15/20 |
50/60 |
42 |
|
9001C024 |
24"(600mm) |
4.6 |
15/20 |
50/60/80 |
42 |
|
9001C028 |
28"(700mm) |
5.0 |
15/20 |
50/60/80 |
50 |
|
9001C030 |
30"(750mm) |
5.2 |
15/20 |
50/60/80 |
54 |
|
9001C032 |
32"(800mm) |
5.5 |
15/20 |
50/60/80/100 |
57 |
